Manual

Component Definition and Maintenance 6-119
7000 “B” Frame 7000-UM150I-EN-P – June 2013
- Now, close the HyperTerminal program. Following message box
will appear.
- Click Yes. At this point, you will be prompted to save the
session.
- Click Yes to terminate the HyperTerminal program.
Step-3: Uploading the Data from the drive
Now, that you have created an empty notepad file and setup
HyperTerminal connection, you are ready to upload the data
from the drive.
- Connect a null-modem cable between your computer‟s serial
port and the serial port „J8‟ on the CIB.
- Restart HyperTerminal program. On the „Connection
Description‟ window click Cancel.