Manual

6-102 Component Definition and Maintenance
7000-UM150I-EN-P June 2013 7000 “B” Frame
- From the File menu, click Open… The Open
window will appear. Locate the HyperTerminal
Connection that you created earlier, and then click
Open.
- If the drive is in download mode, the character C
will appear every 3 seconds inside the
HyperTerminal window.
- At the HyperTerminal window, click on Transfer
menu and select „Send file…‟. The „Send File
window will appear as shown below:
- At the Send File window, click Browse button and
locate the firmware file saved in your laptop. The
firmware file must have .XFW filename extension.