Manual

Component Definition and Maintenance 6-9
7000 “B” Frame 7000-UM150I-EN-P – June 2013
2. Fuses are held in a place with a fuse clip. To remove the fuse
pull firmly.
3. To replace the fuse, hold it in position and push firmly until the
fuse is seated within the fuse clip. Install fuses so that the rating
is visible.
I M P O R T A N TI M P O R T A N T
Make sure to replace the fuse with another of the
same rating. (See Figure 6.7 for location.)
7.2 kV fuses
5 kV fuses
Varistors
Location of ground
Connecting links
Varistors
Location for 7.2 kV fuses
Location for 5 kV fuses
7.2 kV fuses
5 kV fuses
Varistors
Location of ground
Connecting links
Varistors
Location for 7.2 kV fuses
Location for 5 kV fuses
Figure 6.7 –Transient Suppression Network