Manual

3-40 Operator Interface
7000-UM150I-EN-P – June 2013 7000 “B” Frame
Figure 3.50 – Fault Screen
Figure 3.51 – Fault Mask OFF
Figures 3.50 and 3.51 show all fault masks regardless of their current
state. The fault masks can be viewed according to their state by
pressing the [F7] key on the FAULTS SETUP screen. This will
display the FAULTS OVERVIEW screen, typical of Figures 3.52
and 3.53.
Figure 3.52 – AC O/V, Disabled