Manual

Operator Interface 3-31
7000 “B” Frame 7000-UM150I-EN-P – June 2013
Figure 3.36 – PIN Change Completed
At the end of the operation you will see a status as shown in either
Figures 3.36, 3.37 or 3.38 depending on whether you successfully
changed the PIN, incorrectly entered the existing PIN or incorrectly
verified the new PIN.
Figure 3.37 – Invalid PIN
Figure 3.38 – Invalid PIN Verification
If you were not successful in changing the password, simply start
over again by typing in the current password value.