User Manual Owner manual

60 Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
Chapter 5 UEFI Set-up Utility
Firmware Configuration
You can view and modify the various system parameters from the Firmware
Configuration menu. It features several menu buttons on the left side of the screen.
Common Buttons at the Bottom of Screens
Most screens have these common buttons.
Menu Description
Main Use this menu to view general computer information and for basic system configuration.
Advanced Use this menu to configure information for the PXE, PCI, ACPI, processor, SATA, USB,
power, video graphics, super IO, hardware monitor, and AMT.
Chipset Use this menu to configure system chipset information.
Boot Use this menu to configure boot device priority.
Security Use this menu to set or change user and administrator passwords.
Save & Exit Saves changes and reset, discards changes and reset, or restore defaults.
Button Description
Help Click for general help on using the set-up utility.
Default Click to load the default values for all the set-up options.
Restore Click to restore all set-up options to previously saved values.
Save Click to save configuration changes.
Previous (not shown) Click to navigate to the previous screen.
Exit Click to close the set-up utility.