User Manual Owner manual

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014 57
Chapter 5
UEFI Set-up Utility
Chapter Objectives
This chapter provides information about the set-up utility, including an overview
of set-up utility settings you can change and how to upgrade to a new universal
extensible firmware interface (UEFI). In this chapter, UEFI replaces Basic Input/
Output System (BIOS) to describe the system firmware except where BIOS is
specifically used, such as on a graphical interface.
The chapter covers the following topics:
• Set-up Utility Overview
• Access the Set-up Utility
• Set-up Screen Overview
• Firmware Update
• Firmware Configuration
• Diagnostics
• AMI Rescue
• Hardware History
• Exit
Set-up Utility Overview
The set-up utility is a hardware configuration program built into the computer’s
UEFI. The UEFI is already configured and optimized so there is no need to run
this utility. However, you can run the set-up utility to do the following:
• Change the system configuration.
•
Change the UEFI setup when a configuration error is detected by the system.
• Redefine communication ports to prevent any conflicts.
• Read the current amount of system memory.
• Change the boot drive order.
• Set or change the password or make other changes to the security settings.
• Upgrade the system firmware.
• Run the diagnostic utility to determine the cause of system malfunction.
• Restore or back up the operating system.