User manual

20 Industrial 20.1" Flat Panel Monitor
Publication 6185-5.2
Table B
Control Panel for Adjusting Monitor Settings
Abbreviation Control Name Control Function
CLK- Clock Left
Moves the signal sampling points to the left. Eliminates display jitter
and fuzziness. Change this setting after all other adjustments have
been made. Adjust setting until vertical lines are crisp.
CLK+ Clock Right Moves the signal sampling points to the right. Eliminates display
jitter and fuzziness. Change this setting after all other adjustments
have been made. Adjust setting until vertical lines are crisp.
SAVE Save Saves the current settings for the current resolution.
CLEAR Clear Moves the last saved active setting to the current setting.
BKLGHT Backlight Turns the LED backlight ON and OFF.
TEST Test
V DN Vertical Down Moves the display down on the LED display.
V UP Vertical Up Moves the display up on the LED display.
BRT- Decrease Brightness
Decreases brightness of the display. (Not used when front panel
luminance control installed.)
BRT+ Increase Brightness Increases brightness of the display. (Not used when front panel
luminance control is installed.)
H LFT Horizontal Left Moves the display left on the LED display.
H RT Horizontal Right Moves the display right on the LED display.
H- Horizontal Reduce Reduces the horizontal display size. Synchronizes the sampling
frequency with signal frequency.
H+ Horizontal Increase Increases the horizontal display size. Synchronizes the sampling
frequency with signal frequency.