User manual

Industrial 10.4" Flat Panel Monitor 27
Publication 6185-5.0
You use an HD-15 video cable equipped with a conventional HD-15
connector at each end to connect the 6185-A Flat Panel Monitor to the
host computer.
Note:
The following figure is the view looking into the pin end of
the male connector or solder term end of the female
connector.
Figure 10
HD-15 Video Connector
The following table provides the pin numbers and corresponding pin
assignments for the HD-15 video connector with the DDC2B capability:
Table D
Standard HD-15 Video Cable
Monitor HD-15
(Female)
Signal Description
Host
HD-15 (Male)
1Red Video 1
2 Green Video 2
3Blue Video 3
4Not Used 4
5Return 5
6 Red Video Ground 6
7 Green Video Ground 7
8 Blue Video Ground 8
9Not Used 9
10 Sync Ground 10
11 Not Used 11
12 Bi-Directional Data 12
13 Horizontal Sync 13
14 Vertical Sync (VCLK) 14
15 Data Clock (SCL) 15