User manual

Publication 6186M-UM001J-EN-P - July 2008 15
Installing the Monitor Chapter 2
Panel Mounting
The monitors install directly into a panel with mounting clips. The
number of clips varies by model.
Mounting Clips
Mounting Adapters
Optional mounting adapters are available to mount a monitor into the
existing panel cutout of an older monitor.
Required Tools
You need panel cutout tools and a #2 Phillips torque screwdriver.
Mounting Guidelines
Observe these guidelines when installing the monitor in a panel.
• Confirm that there is adequate space behind the panel.
– Allow a minimum of 51 mm (2.0 in.) around the back, sides,
and bottom, and 77 mm (3.0 in.) on the top for ventilation.
– A cabinet with a minimum depth of 74 mm (2.9 in) is
sufficient.
• Cut supporting panels to specifications before installation. Take
precautions so metal cuttings do not enter components already
installed in panel.
Monitor Model Mounting Clips
1200M 8
1500M, 1700M 10
1900M 14
Cat. No. Description
6189V-MMA12 Panel adapter for converting 6185-B to 1200M
6189V-MMA15 Panel adapter for converting 6185-C/F/H to 1500M
6189V-MMA17 Panel adapter for converting 6185-D/J to 1700M