Specifications

Dataliner DL5
The smallest message display in the Dataliner family is
the compact Dataliner DL5. Available in one- or two-line
versions, these terminals are designed for panel mounting
in an industrial environment, and can display messages
that are visible up to 10 feet away.
The DL5 stores up to 387 pre-programmed messages and
displays them when commanded by a controlling device.
These messages can relate status conditions, display
variable data, prompt an operator for action, or help
diagnose a problem.
Dataliner DL50
Dataliner DL50 message displays are the choice for plant-
wide messaging needs. Red or tri-color messages, in
character heights ranging from 2 to almost 5 inches, get
operators’ attention up to 240 feet away. Because of this
visibility, the DL50 is ideal as a slave device to the Dataliner
DL40 Plus. A single DL40 Plus can drive several DL50
message displays, distributing important alarm or process
information across your entire manufacturing area.
Electronic Operator Interface
>>
Message Displays and Operator Modules
•
Red or Tri-color LED messages visible up to
240 feet (73 m)
•
Selectable character size to display 2 lines of 2.1 inch
(53 mm) or 1 line of 4.8 inch (122 mm) characters
•
10 or 20 characters per line
•
Scrolling to display long messages
•
23 display modes for a wide range of visual effects such
as wipe down and starburst
•
Serial (RS-232/RS-485) communication with Dataliner
DL40 Plus, PanelView, or other ASCII device
•
Compact one or two-line displays with 16 characters
per line
•
Slave version to connect to DL40 Plus or other
ASCII host device
•
5 mm (0.2 in) VFD characters visible up to 10 feet (3 m)
•
Up to 387 messages programmed via an ASCII terminal
or with PC-compatible offline software
•
Multiple run modes for application flexibility
•
Parallel or serial (RS-232) communication
51