Specifications

Features
PanelView
Enhanced
A Family of Feature Rich Operator Interfaces
PanelView Standard graphic terminals offer advanced operator interface solutions, with multiple operator input capabilities,
brilliant monochrome or color displays, high performance functions, and flexible communication options.
• Over 140 terminal combinations to fit any operator
interface application
• 14 display combinations, from 3.0” flat panel to 14” CRT,
in color, grayscale, or monochrome, each designed for
minimal installation depth with maximum viewing angles
• Keypad, Touch Screen, or Keypad/Touch Screen
combinations for convenient and flexible operator input
• RS-232 Printer Port to print alarms, alarm lists, triggered
messages and triggered states of a multi-state indicator
• ATA PC Flash Memory Cards for fast application downloads,
convenient storage of Universal Language Support fonts,
and simplified firmware upgrades
• Field Replaceable Backlights to extend screen life of
PanelView 550, 600, 900 and 1000 (color) terminals
• 100,000 hour LED backlight for PanelView 300 and
300 Micro
• DeviceNet Terminal – certified DeviceNet compliant,
connects and communicates at device level on a DeviceNet
link (125k, 250k or 500k baud) using server explicit, I/O or
‘Listen Only’ messaging
• ControlNet Terminal – certified ControlNet International
compliant, communicates to multiple controllers on a
ControlNet network, supporting scheduled and unscheduled
PLC-5 and ControlLogix messages, and redundant cabling
• Data Highway Plus Terminal – communicates to single
or multiple PLC, SLC 5/04, and ControlLogix controllers over
an Allen-Bradley DH+ network
• Remote I/O Terminal – communicates to a PLC, SLC or
ControlLogix system, supporting both discrete and block
transferring of data
• DH-485 Terminal – communicates to single or multiple
SLC or MicroLogix controllers on a DH-485 network
• RS-232 (DH-485 protocol) Terminal – communicates
point-to-point to a MicroLogix or SLC controller as a
dedicated connection for high priority data, as well as the
AIC+ module for DH-485 network communication
• RS-232 (DF1 protocol) Terminal – communicates to
a single SLC, PLC-5, or MicroLogix controller over a point-
to-point DF1 link or DF1 network (modem) full duplex
connection for high performance peer-to-peer
communication
• Profibus Terminal – uses Profibus DP standard protocol
for high-speed (up to 1.5M) data transmission to Siemens
®
and other controllers
• Modbus Terminal – uses half duplex, master-slave
protocol to communicate over non-Rockwell Automation
control architectures including Modicon and GE
®
controllers
Electronic Operator Interface
>>
PanelView Standard
Communication
Hardware
PanelView 300 – 1400 terminals
support ATA Memory Card usage.
27