User manual

30 Rockwell Automation Publication 6186M-UM002B-EN-P - March 2012
Chapter 2 Installing the Monitor
Bench or Tabletop Mounting
Use the optional adapter, catalog number 6189V-MBA, to mount your monitor
on a bench or tabletop arm.
Required Tools
You need the bench or tabletop adapter and a #2 Phillips screwdriver.
Mounting Guidelines
Observe these guidelines when installing the monitor on an arm:
The mounting surface and the mounting arm must be strong enough to
support both the monitor and the mounting hardware.
The interface between the arm and the monitor must meet VESA
FPMPMI 100 mm standards.
The mounting location must provide adequate clearance for positioning
and moving the adjustable unit and routing cables.