Operating System Instruction Manual

Keypad Operation 8–5
Publication 6182-UM001D-EN-P
Table P
Function Key (K-Key) Keypad Functions
7.7 in. Key Default 12.1 in. Key Default
K1 right Alt + F1 K1 right Alt + F1
K2 right Alt + F2 K2 right Alt + F2
K3 right Alt + F3 K3 right Alt + F3
K4 right Alt + F4 K4 right Alt + F4
K5 right Alt + F5 K5 right Alt + F5
K6 right Alt + F6 K6 right Alt + F6
K7 right Alt + F7 K7 right Alt + F7
K8 right Alt + F8 K8 right Alt + F8
K9 right Alt + F9 K9 right Alt + F9
K10 right Alt + F10 K10 right Alt + F10
K11 right Alt + F11 K11 right Alt + F11
K12 right Alt + F12 K12 right Alt + F12
K13 right Shift + F1 K13 right Shift + F1
K14 right Shift + F2 K14 right Shift + F2
K15 right Shift + F3 K15 right Shift + F3
K16 right Shift + F4 K16 right Shift + F4
K17 right Shift + F5
K18 right Shift + F6
K19 right Shift + F7
K20 right Shift + F8
Specialized Keypad Functionality
The RAC6182 keypad has unique user-configurable functionality to
enhance its use in industrial control applications. Configuring the
RAC6182 keypad functionality is done using the Keypad application in
the Windows CE Control Panel and the Keypad Configuration Utility.
Note:
A Keypad Configuration Utility (KCU) for the RAC6182
Industrial Computer can be installed on a desktop PC from
the RAC6182 Applications and Accessories CD. See
“Setting Up and Using the Keypad Configuration Utility
Software” in this chapter on page 8-8 for more information.
Repeat Mode
Repeat mode is selected using the Repeat tab on the Control Panel
Keypad application. When enabled, a key that is held down sends out
repeated "key-down" events until the key is released, and a last "key-up"
event is sent. The repeat rate, delay interval and the delay between the
first key press and the repeating actions are user configurable.
Function keys set for single-character mode exhibit typematic behavior.
Function keys set for macro-string mode do not exhibit typematic or
repeating behavior. The factory default for all keys is repeat mode. The