Operating System Instruction Manual

Installing/Removing Front Bezel Assembly Items 5–7
Publication 6182-UM001D-EN-P
Part Number Description
6189-2KEYKIT8 7.7 in. bezel legend strip kit (3 pcs)
6189-2KEYKIT12 12.1 in. bezel legend strip kit (3 pcs)
To replace the horizontal legend strip (7.7 in. & 12.1 in. versions):
1. Locate the exposed legend strip tab on the lower left side of the
RAC6182 unit.
2. Carefully pull on the tab to remove the installed legend strip.
3. To insert the new legend strip, first slightly cup the strip and
carefully push it into the bezel slot. Short pushes will help slide the
new strip fully into place.
4. Verify the alignment of the legend strip text on the front overlay
keys. Adjust as needed by pushing or pulling slightly on the legend
strip tab.