Operating System Instruction Manual

3–8 Connecting External Devices
Publication 6182-UM001D-EN-P
The RAC6182 Computer has an external HD15 video connector. It can
drive an external monitor with VGA, SVGA or XGA analog video
signals.
Note:
For information on setting the video resolution and refresh
rate for an external monitor, refer to Chapter 10, Display
Settings.
Table I
HD15 Video Connector Pin-Out
PIN Signal
1 RED
2 GREEN
3 BLUE
4 Not connected
5 GND
6 GND
7 GND
8 GND
9 Not connected
10 GND
11 Not connected
12 DDC_DATA (pull-up)
13 HSYNC
14 VSYNC
15 DDC_CLK (pull-up)
16 Shield ground
17 SLCT IN#
Connecting an External
Video Monitor