Operating System Instruction Manual

Connecting External Devices 3–3
Publication 6182-UM001D-EN-P
The mouse and keyboard plug into the side panel mouse and keyboard
ports as shown below. Any standard PS/2 keyboard and mouse devices
can be used. Both devices must be connected before power-up to be
recognized by the Windows CE operating system.
Table E
PS/2 Port Connector Pin-Out
PIN Signal
1 KBDATA
2 Not connected
3 GND
4 VCC
5 KBCLK
6 Not connected
7 MSDATA
8 Not connected
9 GND
10 VCC
11 MSCLK
12 Not connected
13 Shield Ground
14 Shield Ground
15 Shield Ground
16 Shield Ground
17 Shield Ground
Connecting PS/2
Keyboard and Mouse