Manual

16 Industrial Computers for Hazardous Locations
Rockwell Automation Publication 6181X-IN001C-EN-P - April 2011
Bottom View, Catalog Number 6181X-12TPXPDC
Connect Peripherals
Connect the required peripherals, such as keyboard and mouse, to the corresponding I/O ports
on the bottom side of the computer. Refer to the illustration on the previous section for
connector locations.
Observe these guidelines when connecting peripherals to the computer:
• When connecting a device to the serial COM or DVI port, secure the connected device
with screws.
• The USB ports are covered by a hinged door.
– For more information about proper use of these ports refer to Hazardous Locations
statements on page
4.
Item Component
1 Serial COM ports, 2
2 Ethernet ports (RJ
-45), 2
3 DVI-I port
4 PCI riser slot cover
5 Power switch
6 DC input terminal block
7 Functional ground screw
8 Hinged door covering the USB ports, 4
(1)
9 External CompactFlash Type II card slot
(1)
(1) This bottom side external CF slot and USB ports are functionally
hot-pluggable in an environment known to be non-hazardous. For more
information about proper use of these ports refer to
Hazardous Locations statements on page
4.