Installation Instructions Industrial Integrated Display Computers Catalog Numbers 6181F, 6181P Topic Page Important User Information 2 Precautions 3 Computer Options 4 Operating Systems 5 Parts List 6 Mounting Clearances 8 Install the Computer 13 Mount the Display Computer in a Panel 14 Connect Peripherals 15 Connect Peripherals 15 Apply Power 17 Connect to a Network 20 Real Time Clock (RTC) Battery 20 Ship or Transport the Computer 21 Specifications 22 Additional Resources
Industrial Integrated Display Computers Important User Information Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.
Industrial Integrated Display Computers 3 Precautions Read and follow these precautions for use. Environment and Enclosure Information ATTENTION: This equipment is intended for use in a Pollution Degree 2 industrial environment, in overvoltage Category II applications (as defined in IEC publication 60664-1), at altitudes up to 2000 m (6561 ft) without derating. This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR 11.
Industrial Integrated Display Computers Computer Options Available Options Cat. No. Model Series Display Size (in.) Storage(3) Touchscreen Windows OS Package 6181F-2PW7 NDM E N/A SSD N/A 7 Pro 32 bit Performance 6181F-2PW7DC(1) 6181P-2PW7 HDD 6181P-2PW7DC(1) 6181P-2PXP XP Pro SP3 6181P-2PXPDC(1) 6181F-12TPW7 1200P E 12.
Industrial Integrated Display Computers 5 Available Options (cont.) Cat. No. Model Series Display Size (in.
Industrial Integrated Display Computers For computers with the Windows XP operating system, the I386 source directory for Microsoft Windows is on the system drive of your computer off the root directory, C:\I386. This allows for easy removal and addition of Windows components. Computers with rotating hard-disk drives include a recovery partition on the system drive containing the original factory image.
Industrial Integrated Display Computers 7 Required Tools These tools are required for computer installation: • Panel cutout tools (panel mount only) • #2 Phillips screwdriver • Antistatic wrist strap (recommended) Installation Guidelines Follow these guidelines to make sure your computer provides safe and reliable service: • The installation site must have sufficient power. ATTENTION: To maintain an electrically safe installation, the AC powered computers must be plugged into a grounded outlet.
Industrial Integrated Display Computers • When mounted, the computer cannot be tilted more than 60° from vertical. ≤60° from Vertical ≤60° from Vertical Mounting Clearances Because of self-heating, do not operate the computer in an enclosure using minimum clearances unless adequate ventilation or other cooling methods are used to lower the temperature within the enclosure. IMPORTANT 1 2 3 5 4 Item Description Value 1 Top 50 mm (2 in.) 2 Left (for airflow) 50 mm (2 in.
Industrial Integrated Display Computers 9 Computer Dimensions Dimensions for the computers are in mm (in). Non-display Computers 353 (13.90) 1.6 (0.06) 108 (4.25) 335 (13.20) 83 (3.28) 12 (0.50) 238 (9.37) 190 (7.50) 251 (9.
Industrial Integrated Display Computers 1200P Integrated Display Computer - Performance 320 (12.60) 115 (4.5) 115 (4.5) 124 (4.90) 99.8 (3.93) 14.5 (0.57) 349 (13.74) 279 (10.98) 250 (9.84) 1200P Integrated Display Computer - Standard 320 (12.60) 99.4 (3.91) 90.35 (3.56) 115 (4.5) 115 (4.5) 349 (13.74) 279 (10.98) Rockwell Automation Publication 6181P-IN010F-EN-P - July 2013 85 (3.36) 14.5 (0.57) 251 (9.
Industrial Integrated Display Computers 11 1500P Integrated Display Computer - Performance 31.8 (1.25) 320 (12.60) 31.8 (1.25) 100 (3.94) 145 (5.7) 145 (5.7) 410 (16.14) 28 (1.10) 14.5 (0.57) 15.8 (0.62) 309 (12.16) 251 (9.88) NOTE: 1500P computers with stainless steel bezels do not have the front USB port shown at right. 15.8 (0.62) 1500P Integrated Display Computer - Standard 32.55 (1.28) 320 (12.6) 32.55 (1.28) 95 (3.74) 86 (3.38) 144 (5.67) 144 (5.67) 410 (16.14) 29 (1.1) 86 (3.
Industrial Integrated Display Computers 1700P Integrated Display Computers - Performance 51 (2.0) 320 (12.56) 51 (2.0) 100 (3.94) 145 (5.7) 145 (5.7) 452 (17.80) 28 (1.10) 14.5 (0.57) 38 (1.51) 251 (9.89) 356 (14.01) NOTE: 1700P computers with stainless steel bezels do not have the front USB port shown at right. 38 (1.51) 1700P Integrated Display Computer - Standard 51 (2.0) 320 (12.6) 51 (2.0) 95 (3.74) 86 (3.38) 28.6 (1.13) 150 (5.90) 150 (5.90) 86 (3.38) 452 (17.80) 14.5 (0.57) 38.5 (1.
Industrial Integrated Display Computers 13 Install the Computer The computers support the following mounting options: • Panel mount • Wall mount (for non-display computers) Panel Mounting Guidelines Observe these guidelines when installing the computer in a panel: • Remove all electrical power from the panel before making the cutout. • Confirm that there is adequate space behind the panel. For specific information, refer to Mounting Clearances on page 8.
Industrial Integrated Display Computers Mount the Display Computer in a Panel Mounting clips secure the display computer to the panel. The number of clips varies by model. Computer Model Number of Clips All display models with aluminum bezel and 1500P display with stainless steel bezel 10 1700P display with stainless steel bezel 12 Cat. No. Description 6189V-MCLPS3 Replacement mounting clips (14) Follow these steps to mount the computer in a panel. 1. Remove power from the panel. 2.
Industrial Integrated Display Computers 15 Mount the Non-display Computer on a Wall Four mounting screws secure the non-display computers to a wall. Follow these steps to mount a non-display computer. 1. Verify the power is disconnected. 335 (13.20) 2. Mount the computer to a wall by using four M5 pan head screws and tighten to a torque that is appropriate for the screw and wall material. 190 (7.50) The illustration shows hole locations with the dimensions in mm (in.).
Industrial Integrated Display Computers Performance and Non-display Models 1 2 3 4 11 10 5 Bottom View (1500P model shown) 6 15 14 13 12 9 8 7 Item Component Item 1 PS/2 mouse port 9 Component Functional ground screw 2 PS/2 keyboard port 10 USB ports, 4 3 Parallel port 11 CompactFlash Type II card slot 4 Ethernet ports (RJ45), 2 12 Serial COM ports, 2 5 DVI-I port 13 Microphone-in jack 6 PCI riser slot cover(1) 14 Audio line-out jack 7 Power switch 15 Audio li
Industrial Integrated Display Computers 17 Apply Power The computer connects to either a 100…240V AC or 18…32V DC power source, depending on the model. SHOCK HAZARD: Connect the AC power cord or the DC ground connection to a power source with an earth ground. Failure to follow this warning could result in electrical shock. We recommend that the computer circuit has its own disconnect. Use an uninterruptible power source (UPS) to protect against unexpected power failure or power surges.
Industrial Integrated Display Computers Connect AC Power to Standard Computers Follow these steps to connect AC power to the standard computers. 1. Connect the power cord to the AC power input (1). 2. Secure it in place with the retention clip (2). 1 2 3. Connect the DC barrel connector to the power input jack (3). 4. Twist the locking ring clockwise to secure it in place (4). 4 3 5. Apply 100…240V AC power to the computer.
Industrial Integrated Display Computers 19 The power supply is internally protected against reverse polarity. ATTENTION: Use a SELV isolated and ungrounded power supply as input power to the computer. This power source provides protection so that under normal and single fault conditions, the voltage between the conductors and functional earth/protective earth does not exceed a safe value. Follow these steps to connect the computer to a DC power source. 1. Verify the main power switch or breaker is off. 2.
Industrial Integrated Display Computers Connect to a Network The computers have 2 Gb LAN ports. The computers connect to an Ethernet network by using CAT5 or CAT5E twisted-pair Ethernet cabling with RJ45 connectors. Performance and Non-display Computer IMPORTANT Standard Computer To prevent performance degradation of Ethernet communication, do not subject the computer or cables to extreme radiation or conducted high-frequency noise.
Industrial Integrated Display Computers 21 If your computer does not display the correct time and date, replace the battery. ATTENTION: Replace the battery with a specially-packaged replacement part from Allen-Bradley. Use of another battery may present a risk of fire or explosion. At the end of its life, the used battery should be collected separately from any unsorted municipal waste and recycled.
Industrial Integrated Display Computers Specifications Refer to the Industrial Integrated Display Computers User Manual, publication 6181P-UM002, for additional specifications. Electrical Attribute 6181F, 6181P Performance and non-display, AC Input voltage, AC Line frequency Power consumption, AC 100…240V AC, autoranging 47…63 Hz 110VA (0.95 A @ 100V rms, 0.46 A @ 240V rms) Performance and non-display, DC Input voltage, DC Power consumption, DC 18…32V DC 95 W (5.28 A @ 18V, 2.
Industrial Integrated Display Computers 23 Environmental Attribute 6181F, 6181P Temperature, operating(1) All Standard models Non-display 1200P and 1500P Performance 1700P Performance 0…50 °C (32…122 °F) 0…55 °C (32…131 °F) 0…55 °C (32…131 °F) 0…50 °C (32…122 °F) Temperature, nonoperating(1) -20…60 °C (-4…140 °F) Relative humidity 10…90% noncondensing Altitude, operating 2000 m (6561 ft) Altitude, nonoperating 12,000 m (40,000 ft) Shock, operating(1)(2) 15 g (1/2 sine, 11 ms) Shock, nonoperat
Additional Resources These documents contain additional information about related products from Rockwell Automation. Resource Description Industrial Integrated Display Computer User Manual, publication 6181P-UM002 Provides a system overview and procedures to install the computer, set up computer connections, operate the computer, and troubleshoot the computer.
