Instruction Manual

Preface
Preface
This manual shows you how to:
Install the 6001-F2E Standard Driver software
Communicate with DH-485 stations via the 6001-F2E Standard Driver
software
Use this manual and the 6001-F2E Standard Driver software if any of
your application programs require information from devices such as the
SLC-500 programmable controller. We assume you are familiar with the
DOS operating system and C programming language.
See the following publications for information about communicating on
the DH-485 network.
Refer to this manual For
PC DH-485 Interface Module Installation
Data (publication 1784-2.23)
installing the 1784-KR module
Data Highway/Data Highway Plus
Protocol and Command Set User ’s
Manual (publication 1770-6.5.16)
information on PLC commands and
protocol
SLC-500 Advanced Programming
Software User ’ s Manual (publication
1747-801)
information on the SLC-500
This Manual’s Purpose
Audience
Related Publications