User Manual User Manual

414 Rockwell Automation Publication 193-UM015B-EN-P - June 2014
Appendix C EtherNet/IP Information
Comm Adapter Info Object — CLASS CODE 0x0C8
No class attributes are supported.
One Instance of the Comm Adapter Info Object is supported with the following
attributes
Table 432 - Comm Adapter Info Object Instance Attributes
The following common services are implemented
Table 433 - Comm Adapter Info Object Common Services
E300 Status Object — CLASS CODE 0x0375
The following instance attributes are supported:
Table 434 - E300 Status Object Instance Attributes
Attribute ID Access Rule Name Data Type Value
1 Get System Name String String
Describes the E300 System components
installed
2Get
Trip Status Parameter
Location
UINT
The parameter number of the first trip status
parameter
3Get
Number of Trip Status
Params
UINT
The number of trip status parameters
following the parameter number given in
attribute 2. (Max=10)
4Get
Warning Status
Parameter Location
UINT
The parameter number of the first warning
status parameter
5Get
Number of
WarningStatus Params
UINT
The number of warning status parameters
following the param number given in
attribute 4. (Max=10)
6Set
Selected Input
Assembly
UINT
The ENIP writes the input assembly instance
specified in an Ethernet/IP Forward Open
service connection point.
7 Get Input Assembly Size UINT The size of the chosen Input Assembly
8Set
Selected Output
Assembly
UINT
The ENIP writes the output assembly instance
specified in an Ethernet/IP Forward Open
service connection point.
9 Get Input Assembly Size UINT The size of the chosen Output Assembly
Service Code
Implemented for:
Service Name
Class Instance
0x0E No Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Attribute Name Byte Data
2Overload Data
0
OL Time to Trip
1
2
OL Time to Reset
3
4
%Therm Utilized
5