User Manual User Manual

216 Rockwell Automation Publication 193-UM015B-EN-P - June 2014
Chapter 6 Commands
Clear kVAh
When the Clear kVAh command is issued, the E300 Electronic Overload Relay
will set the following parameters to a value of zero (0):
• kVAh x 10
9
(Parameter 100)
• kVAh x 10
6
(Parameter 101)
• kVAh x 10
3
(Parameter 102)
• kVAh x 10
0
(Parameter 103)
• kVAh x 10
-3
(Parameter 104)
Clear Max kW Demand
When the Clear %TCU command is issued, the E300 Electronic Overload Relay
will set Max kW Demand (Parameter 106) to a value of zero (0).
Clear Max kVAR Demand
When the Clear %TCU command is issued, the E300 Electronic Overload Relay
will set Max kVAR Demand (Parameter 108) to a value of zero (0).
Clear Max kVA Demand
When the Clear %TCU command is issued, the E300 Electronic Overload Relay
will set Max kVA Demand (Parameter 110) to a value of zero (0).
Clear All
When the Clear All command is issued, the E300 Electronic Overload Relay will
set the following parameters to a value of zero (0):
• % The
rmal Capacity Utilized (Parameter 1)
• Operating Time (Parameter 28)
• Starts Counter (Parameter 29)
• kWh x 10
9
(Parameter 80)
• kWh x 10
6
(Parameter 81)
• kWh x 10
3
(Parameter 82)
• kWh x 10
0
(Parameter 83)
• kWh x 10
-3
(Parameter 84)
• kVARh Consumed x 10
9
(Parameter 85)
• kVARh Consumed x 10
6
(Parameter 86)