Installation Instructions Owner manual

Installation and Operating Instructions
Bulletin 56RF RFID Rectangular 80 x 90 mm Transceiver
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
This publication does not include all specifications, dimensions, or any special installation considerations.
Refer to the product catalog pages for additional information.
Description
The rectangular transceiver is the largest transceiver in the
Allen Bradley high frequency 13.56 MHz RFID family and
measures 80 x 90 mm. This transceiver is ISO 15693
compliant and can read/write ICODE tags SLI and SL2,
allowing infinite tag configuration options from various
manufacturers. Built-in LEDs allow for quick visual diagnosis
of module status and read/write status.
Rectangular transceivers are recommended for high speed/
high performance applications because of their large sensing
range. Transceivers can be mounted up to 300 ft (91.4 m)
away from the interface module, and tags are readable from
distances up to 6.6 in. (168 mm). This transceiver has an
enclosure rating of IP67 and is designed to withstand harsh
industrial environments.
Features
• 13.56 MHz high frequency RFID solution
• ICODE ISO 15693/ISO 18000-3 M1 Compliant
• Read/write speeds up to 625 B/s
• Transceivers can be mounted up to 300 ft (91.4 m) away
from interface modules
• Built-in LEDs for diagnostics
• Universal mounting
• Reliable performance in harsh environments
Typical Applications
• Asset tracking
• Data acquisition
• Product handling
• Tool management
• Automotive
• Food and pharmaceutical
• Security and entrance
Minimum Distance Between Transceivers
Minimum Distance from Surrounding Metal
Min. 600 mm
Metal
Min.
50 mm
Specifications
➊ No condensation
➋ Range reference for a 50 mm diameter tag
Product Selection
Scanning Area ➌
Note: Ideal tag distance for maximum performance is 70…130 mm.
➌ Referenced for a 50 mm disc tag.
General
Enclosure Rating IP67
Operating Temperature -25…+70 °C (-13…+158 °F)
Storage Temperature -40…+85 °C (-40…+185 °F)
Operating Humidity ➊ 35…95% RH
Storage Humidity ➊ 25…85% RH
Vibration 10 g at 10…500 Hz
Shock Resistance 50 g
Recommended Sensing Distance ➋ 4 in. (102 mm)
Max. Sensing Distance ➋ 6.6 in. (168 mm)
Max. Distance from Interface Module 300 ft (91.4 m)
Compliance
CE, cULus, C-Tick
Type of Equipment Industrial control
Electrical
Supply Voltage 24V DC (-20…+10%)
Max. Current Consumption 100 mA
Tag Compatibility
ICODE tags SLI, SL2
ISO 15693 / ISO 18000-3 M1
Connector M12 4-pin male
Communication Systems
Half duplex communication system
(RS-485)
Baud Rate (Host) 9600 / 19200 / 38400 / 115200 bps
Frequency 13.56 MHz
Baud Rate (Tag) 26.48 kbit/s
Data Length 8-bit
Description Cat. No.
Rectangular 80 x 90 Transceiver
56RF-TR-8090
Misalignment
Sensing Distance [mm]
0
50
100
150
Side Lobe
Side Lobe
OFF OFF
OFF
0
-150
-100
-50 50 100 150
130
70
ON