Owner's manual

Appendix D
Configuration Data
D–12
Table D.8
Configuration Blocks #69–71 – Reference Windows 1–3 (Toolset 2)
Remote I/O
& RS–232
Word #*
Bit # Definition Usage Notes
19 0–15 Feature 2 Search Window Width
20 0–15 Feature 2 Search Window Height
21–24 0–15 Reserved
25 0–7 Reserved
25 8–15 Feature 2 Score 0 = Minimum Value
255 = Maximum Value
26 0–15 Feature 3 Search Window X
Location
Relative to the upper left corner.
27 0–15 Feature 3 Search Window Y
Location
Relative to the upper left corner.
28 0–15 Feature 3 Search Window Width
29 0–15 Feature 3 Search Window Height
30–33 0–15 Reserved
34 0–7 Reserved
34–35 8–15 Feature 3 Score 0 = Minimum Value
255 = Maximum Value
* Refer to Chapter 6 for Pyramid Integrator long word descriptions.
Table D.9 shows the function of each word in the gage 1–32 (Toolset 2)
configuration blocks.
Table D.9
Configuration Blocks #72–103 – Gages 1–32 (Toolset 2)
Remote I/O
& RS–232
Word #*
Bit # Definition Usage Notes
0 0–15 Block Transfer Signature
1 0 Enable 0 = Disabled
1 = Enabled
1 1–15 Reserved
2–3 0–15 Reserved
4 0–7 Low Threshold/Gray Scale Factor 0 – 63
0 – 39
If binary operation, value is used as the
threshold. If gray scale operation, value is
scale factor.
* Refer to Chapter 6 for Pyramid Integrator long word descriptions.
Configuration Blocks 69–71
(cont’d)
Configuration Blocks 72–103