Owner's manual

Appendix D
Configuration Data
D–3
Table D.1
Configuration Block #1– System Environment (cont’d)
Remote I/O
& RS–232
Word #*
Bit # Definition Usage Notes
14–15 0–15 Reserved
16 0–7 Toolset Display Status 0 = Disabled
1 = Enabled
All tools appear simultaneously while setting a
given tool.
16 8–15 Reserved
17 0–7 Reserved
17 8 Learn Mode 0 = Disabled
1 = Enabled
17 9 Outputs Enable 0 = Disabled
1 = Enabled
17 10 Freeze Enable 0 = Disabled
1 = Enabled
17 11 Halt Enable 0 = Disabled
1 = Enabled
17 12–15 Runtime Toolset Display 0 = Toolset 1
1 = Toolset 2
18–31 0–15 Reserved
32 0–15 Toolset 1 Pulse Width In milliseconds.
33 0–15 Toolset 2 Pulse Width In milliseconds.
34–44 0–15 Reserved
* Refer to Chapter 6 for Pyramid Integrator long word descriptions.