Owner's manual

Appendix B
Discrete Bit Results
B–11
Table B.3
Discrete Bit Outputs
Word # Bit #
PI Backplane
RS–232
and
Remote I/O
D
E
C
I
M
A
L
O
C
T
A
L
Definition Usage Notes
PI PLC
2 0 13 15 I/O Request 0 = No Request
1 = Request
Bit 13 commands are specified in:
Output words 2, 4, and 5 (Remote I/O)
Output words 4, 6, and 7 (Backplane)
You must reset bit to 0, then back to 1 to repeat an
I/O request.
2 0 14 16 Configuration
Move
0 = No Request
1 = Request
Bit 14 commands are specified in:
Output word 2 (Remote I/O)
Output word 4 (Backplane)
You must reset bit to 0, then back to 1 to repeat a
configuration move request.
2 0 15 17 Not Used