Owner's manual

Chapter 5

Using the RS-232 Ports

5–39

The read results command can be executed more than once per command by

specifying an n times value. This command is toolset dependent. Toolset 1

is specified by 04. Toolset 2 is specified by 05.

Examples:

07 00 01 18 01

Operation Count Object

This command reads the results of toolset 1, reference line #1 (4 data bytes

returned)

07 00 01 17

Operation Count Object

0B05

This command reads the results of toolset 2, window #11 (4 data bytes

returned).

07 00 01 16

Operation Count Object

1504

This command reads the results of toolset 1, gage #21 (4 data bytes

returned).

07 00 01 1A

Operation Count Object

This command reads the results of toolset 1, light probe (4 data bytes

returned).

07 00 01 04

Operation Count Object

This command reads the results of toolset 1, light probe (4 data bytes

returned).