USER-PAK Option

Chapter 8
Defining Strings for Serial Ports and Viewports
8 – 30
Figure 8.8 Using the calculator pad for selecting the Repeat String parameters
Calculator Pad
End: box
Value Out of Range: If you try to set a parameter to a value which is not
valid, such as a Start value higher than the End value, or a value out of
the 1-127 range, the calculator pad will flash the message – Value Out
of Range.
Example of Using the Repeat String and Index Character
Serial Port: This section provides an example of using the repeat string
feature, and the index character. For this example, assume the following
inspection results:
Gage 1 = 205
Gage 2 = 30
Gage 3 = (gage disabled)
Gage 4 = 110
Gage 5 = 20
The Repeat String settings are set to:
The string text is entered as: