INSTALLATION MANUAL Manual

Chapter 5
Installing the Peripherals
5-8
Industrial disk (5730ID3)
1. Attach the one end of the cable
(5730IDC) to the port labeled
DISK BUS OUT on the first disk
2. Attach the other end of the cable to the port
labeled DISK BUS IN on the second disk.
3. Secure the connectors.
16764
Do this if you are
connecting a
159Mbyte industrial
disk to the MicoV AX
Information Processor
1. Attach the one end of the cable to
the port labeled DISK BUS OUT
on the first disk.
2. Attach the other end of the cable
to the port labeled DISK BUS IN
on the second disk.
3. Secure the connectors.
4. Then attach the terminator
(5710SSC) to the port labeled
DISK BUS OUT on the second disk.
Terminator
18536
Industrial disk (5710ID4, ID5, ID6, ID7)
Do this
if you are
connecting a
209Mbyte,
418Mbyte, or a
480Mbyte
industrial disk to
the MicoV AX
Information
Processor