INSTALLATION MANUAL Manual

Chapter 4

Installing the Modules

4-18

To install the LP, use the worksheet as a guide and complete the following:

install the LP

install the battery

set the LP module address

make connections to the module

Install the LP

See appendix A to install the module in the chassis.

Install the Battery

To install the LP battery, see “Install the Battery” section on page 4-11

for instructions.

Set the LP Address

Follow the steps below to set the LP module address. The address must

start at 1 for the first LP and be consecutive for the other LP modules up

to 4.

1. Locate the pushwheel on the front panel of the LP.

2. Set the pushwheel as indicated on the worksheet.

Setting the pushwheel:

To: Push the:

decrease the number

increase the number

top button

bottom button

16751

LP Module