INSTALLATION MANUAL Manual

Chapter 4
Installing the Modules
4-9
Follow the steps below to set the jumpers and switches.
Set Switch Bank
1. Set switch bank 1 as shown on the worksheet for the RM/KA module.
SB1
Switch bank 1 (communication channel)
(Front)
17078
Top of RM/KA module
SB1
Up (away from board)
Down (toward board)
12345678
2. Set switch bank 2 as shown on the worksheet for the RM/KA module.
SB2
Top of RM/KA module
(Front)
Switch bank 2 (station address)
17079
Up (away from board)
Down (toward board)
12345678
SB2