INSTALLATION MANUAL Manual

Index
I–5
user interface box (2801-N21), 211
N
no handshaking, null-modem cables, C11
nonstandard I/O, installing, 81
null-modem cables
no handshaking, C11
pinouts, C11
O
Open Systems Interconnect (OSI) Interface
Module or Cx. See OSI interface
module, v
OSI interface module
(Cx), v
battery holder, 427
cabling specifications
(broadband/carrierband port), 430
check LEDs, 116
communication defaults, 426
communication ports, (illustration), 431
configurable parameters, 432
connecting a device, 430
connecting the module, 428
disposal of battery, 41
documentation, 431
illustration, 17
installing, 427, 432
modes, 433
operating modes, 426
RS-232 port, 429
setting switches, 426
setting the pushwheel address, 428
slot times, 432
specifying switch settings, 433
start up and configure, D1
software, D8
system load, 432
OTW. See overtemperature warning (OTW),
wiring, 54
P
panel mounting, 25
peripherals
check LEDs, 1110
installation, 51
pin assignments, RS-232 connector, OSI
interface module, 429
PLC interface module, 83
PLC-5/250 processor, start up and
configure, D1
power interlock relay, 102
power supply, 14, 102
connection
ac power, 103
power interlock relay, 102
connection to fan assembly, 46
I/O, 104
installation, 45
operating voltage, 45
outside chassis, 73
specifications, 45
processor input interrupts (PII), 419
program loader, 19
connecting, 122
connection, MicroVAX Information
Processor, 59
R
rack mounting, 22
RediPANEL Keypad
module switches, 86
push-button switches, 86
related publications, v
remote I/O, CVIM module link connection,
61, 67
Remote I/O link, connecting, 91
remote scanner, v
remote scanner. See RS2, 14
remote/local scanner. See RS, 14
removing
memory module from the chassis, A2
module from the chassis, A1, A8
replacing
EI module, 424
MicroVAX Information Processor, 421,
424
resource manager, v
resource manager. See RM, 14
RM
battery holder, 411
cable pinouts for ports, C4
changing a memory module, A1
check LEDs, 114, 117
connections, 412
DH/DH+, 415
industrial terminal, IBM AT or XT
compatible, 51
port 2A and 2B pinouts, C4
RS-232, RS-422, RS-423 devices,
412
disposal of battery, 41