INSTALLATION MANUAL Manual

Index
I–2
Color CVIM module, illustration, 15
color monitor
connection, user interface box, 64
dimensions, B10
communication
interface module, C2
pinouts, C4
conductors, grounding, 32
Configurable Vision Input Module. See
CVIM module, v
configuring
direct communication module, 81
MicroVAX Information Processor, 121
OSI interface module, 431
PLC interface module, 83
Connecting, remote I/O link, 91
connecting
ac power, 101
black and white monitor, 64
camera, 65
carrierband, 430
color monitor, 64
device with an OSI interface module,
430
fan assembly, 46
I/O, 417
I/O board, 66
I/O interface box, 62
I/O link, 91
industrial terminal, 412
light pen, 65
PIIs, 419
power interlock relay, 102
program loader, 59, 122
remote I/O link, 67
RS-232 device, OSI interface module,
428
RS-232, RS-422, RS-423, 412
user interface box, 63
conventions, v
switches, 81
CVIM module, v
check LEDs, 115
checking components, 118
completing installation of components,
61
connection
camera, 65
remote I/O Link, 67
I/O interface box, 62
illustration, 15
installation, 420
module address, 421
mounting the camera, 210
switch for camera power, 420
user interface box, 63
CVIM2 module, illustration, 15
D
daisy-chain configuration, 91
Data Highway/Data Highway Interface Plus
Module. See KA module, v
data transmission rate, PLC interface
module, 83
DH+ Interface Board (1784-KT,-KTK1),
51
dimensions, B1
1771-A3B 12-slot I/O chassis with power
supply, B13
1771-A3B 16-slot I/O chassis with power
supply, B13
1771-A3B1 12-slot I/O chassis with
power supply, B12
1771-A3B1 16-slot I/O chassis with
power supply, B12
4-port distribution panel, B2
4-slot chassis, B2, B12, B13
8-slot chassis, B1, B12, B13
black and white monitor (12"), B8
black and white monitor (9"), B9
camera, B11
color monitor, B10
fan assembly, B1
I/O board, B8
I/O interface box, B6
industrial disk, B3
user interface box, B4
direct communication module switches,
82
disposal of, lithium battery, 42
E
EI module
check LEDs, 117
illustration, 15
installing, 424
jumper settings, checking, 426
replacing, 424
start up and configure, D1
electrostatic damage, 41
electrostatic discharge, 12
emergencies, lithium battery, 43
error codes, 126, 127, 128
errors, 125
Ethernet address, 1210