Instruction Manual

10
Accessories
Micron Conversions
Application Notes
1. The sensor should be powered for approximately 5 minutes for maximum precision.
2. The sensor is ready to operate after a delay (≤300 ms).
3. The precision of the sensor is dependent on the combined errors of linearity, resolution and temperature drift.
Description Cat. No.
2m (6.5ft) Micro QD Cordset 889D-F5AC-2
Mounting Bracket 45BPD-BKT1
—
Protective Mounting Bracket 45BPD-BKT2
—
1 μm=
0.001 mm
1 μm=
0.000039 inches
25.4 μm=
0.001 inches (one thousandth)
20 μm=
0.00079 inches (0.79 thousandths)