Safety Light Curtain User Manual Instruction Manual

R
GuardShield™ Micro 400 Safety Light Curtain User Manual
26
Original instructions
Optional Safety Relay Expansion Module
Safety Relay Interface accessories for MSR41 or MSR42 Controllers
The MSR41 or MSR42 can have up to three MSR45E safety relays
interconnected. Each module requires a ribbon cable connector
to make the interconnection. The table shows the cat. no. for each
ribbon cable connector.
Optical interface
Operation mode and parameters of the MSR42 controller may be
changed using the configuration software which is available on
www.ab.com and with the optical interface 445L-AF6150.
Programming of the MSR42 is only necessary for advanced
operating modes (e.g. blanking, muting, etc.) or for connection of
additional devices (e.g., enabling switch, emergency stop button,
etc.).
Relay Input Voltage Reset Outputs Cat.No.
MSR45E
Safety Relay Expansion Module
Supplied by MSR41 or MSR42 Determined by MSR41 or MSR42 2 N.O. 440-P4NANS
Description Cat. No.
Ribbon cable – for one MSR45E 440R-ACABL1
Ribbon cable – for two MSR45Es 440R-ACABL2
Ribbon cable – for three MSR45Es 440R-ACABL3
Description Cat. No.
USB optical interface software configuration tool used to configure
the MSR42
445L-AF6150