User Manual

Publication GMSI00-UM001A-EN-E - February 2005
Loading and Unloading 69
To manually initialize the data collector any time
You must have the Enpac Ex connected to the computer. You can also use the
Enpac Ex to initialize memory.
1. Select Tools > Load/Unload.
2. Click the D.C. Functions button in the Load/Unload dialog box. The
Data Collector Functions dialog box appears.
3. Click the Initialize Data Collector button. A progress bar appears
providing a status of the initialization.
4. When initialization is complete, click Close.
Loading Inspection Codes
Emonitor and the Enpac Ex support loading inspection codes with a list. The
Enpac Ex stores inspection codes with a loaded list. You can only load
inspection codes with a list.
1. Select Tools>Load/Unload.
2. Click the Load Options button in the Load/Unload dialog box. The
Load Options dialog box appears.
Check to load
inspection
codes