User Manual

Publication GMSI00-UM100A-EN-E - February 2005
Specifications 103
Signal Measurement cont.
Input Signal Range
Transducer Check
Signal
Auto Range
Dynamic Range
Frequency Range
Integrated
Filters - High Pass
Bearing Condition
gSE Filters
ESP Filters
Real Time Rate
FFT Resolution
Time Block Length
Averaging
Alarms
Note Codes
Non ICP: ±12 V or 0 to 24 V
ICP: 0 to +20 V
Bias Voltage Integrity
RMS
Peak
Peak to Peak
True Peak
True Peak to Peak
Yes
85 dB typical (24-bit Sigma Delta ADC)
DC to 40 kHz max
2.5 Hz (5% by 10 Hz)
2 Hz Hardware Filter
gSE
ESP
100, 200, 500, 1000, 2000, 5000 Hz
0.6-1.25; 1.25-2.5; 2.5-5; 5-10; 10-20 kHz
40 kHz
100 to 12,800 lines
256 to 16,384 samples
Time
Spectral
Overall
Spectrum
100 note codes (select up to 6)
Codes downloaded from Emonitor
Enpac Ex Technical Specifications
Product Feature Specification