Safety Relay w/DeviceNet Communications User Manual

Configurable Monitoring Safety Relay with DeviceNetâ„¢ Communications
Chapter 3: Quick Start Guide
MSR312-UM001B-EN-P 31
Step 4. Using Write Tag to set Semiconductor Output Y34.
The Y34 Parameters (Parameter 83…88) are partly configurable (refer to Parameter description). Its output state can be set by
using Parameter 83. Therefore a "Momentary" "Push Buttons" Object is added to the Project.
Open the Tag Form as described in Step 3. The PanelView 600 Touch provides the functionality to configure objects to simulate
a switching device by triggering the object on the screen. The selected Push Button is configured as follows:
Type: Momentary
Contacts: NO
Hold Time: 500ms (Default)