Installation Instructions Owner manual

16 Guardmaster® EtherNet/IP™ Network Interface
Publication 440R-IN078A-EN-P - January 2014
Specifications
Guardmaster EtherNet/IP Network Interface
Attribute Value
Safety classification value • Not applicable. This product is not intended for
safety-related control or diagnostics.
Guardmaster Safety Relay capacity • 6 Guardmaster safety relays
Supported modules (FW Rev 2.xx
or greater)
• GSR DI (Catalog number 440R-D22R2)
• GSR DIS (Catalog number 440R-D22S2)
• GSR EM (Catalog number 440R-EM4RR2)
• GSR EMD (Catalog number 440R-EM4R2D)
• GSR GLP (Catalog number 440R-GL2S2P)
• GSR GLT (Catalog number 440R-GL2S2T)
Location Left side of the Guardmaster Safety Relay system
Power Supply
Attribute Value
Input voltage rating 24V DC
Input voltage, range 11...26.4V DC
Input overvoltage protection Reverse polarity protected
Ethernet Communication
Attribute Value
Ethernet communication rate 10/100 Mbits/s, half or full-duplex
Ethernet ports 2, configured as Embedded Switch
Ethernet network topologies
supported
Star, Tree, Daisy-chain/Linear, and Ring
Ethernet connectors RJ-45, Category 5
Ethernet cable Category 5:
shielded or un-shielded
Ethernet wire connections, max. See Wire size on page 17