Owner manual

Section 4 - SPECIFICATIONS
Control Unit 440F-C4000P 440F-C4000S 440F-C4000D
Conformity EN 1760-1, EN 60204-1, EN 954-1: CATEGORY 3, UL 508
Response time (mat pressed- 35mS
safety contacts open)
Environmental protection IP65 NEMA12 Enclosure-IP40
DIN0470
Terminals-IP20
DIN0470
Impulse withstand voltage 2500V
Contamination level III
Min switched current/voltage 10mA/10V
Power supply - user select 110/230V AC (50-60Hz) and 24V AC/DC +10% -15%
(110V setting also allows use at 100v ±10%)
Power consumption <9 VA 6W
Relay outputs 2 x independant volt free N/O safety contacts
1 x volt free N/C auxilliary contact
NB - Aux must not be used for safety circuit
Fuse externally, 5A max (quick acting) for AC
2.5A max (quick acting) for DC
Utilisation category AC - 15 ; 4A / 250V AC
DC - 13 ; 2A / 30V DC
Outputs: remote reset/indicator 24V DC / 0.24W
Inputs Remote reset switch (2 x N/O)
Safety inputs 4 wire mat
Indicator LEDs LED 1 Power GREEN
LED 2 Auto reset mode GREEN
LED 3 Manual reset mode GREEN
LED 4 Machine enabled GREEN
Internal controls AC Voltage selector, auto/manual reset selector
Internal supply fuses 500mA Replaceable 500mA Replaceable 500mA Replaceable
(2 off) (2 off) (1 off)
500mA Resettable
(1 off)
Operating temperature range -10°C to +45°C
Humidity Up to 90% RH at +50°C
Vibration Tested in accordance with IEC 68-2-6, frequency range
10 - 55Hz, displacement 0.15mm
10 cycles per axis, sweep rate, 1 octave per minute
MC-MC Contactor monitor loop Normally closed contactor loop
Maximum conductor size 1 x 1.5mm
2
stranded 1 x 1.5mm
2
stranded 2 x 1.5mm
2
stranded
with sleeves stripped with sleeves stripped with sleeves stripped
5mm, 1 x 2.5mm
2
5mm, 1 x 2.5mm
2
8mm, 2 x 2.5mm
2
solid conductor solid conductor solid conductor
Terminals Minus terminal Minus terminal Plus/minus captive
screws M2.5 screws M2.5 terminal screws M3.5
mounted at 45° mounted at 45° with self lifting
to PCB to PCB connection,washer
terminal boards
separately removable
Installation group C in accordace with VDE 0110
Material Polycarbonate Steel c/w Polycarbonate
polycarbonate screen
Fixing details 4 x M4 holes 4 x M6 holes 35mm din-rail
Misc. In the manual reset
N/A N/A mode (M), a reset
button must be
connected
Housing D = 75mm D = 143mm D = 120mm
H = 180mm H = 230mm H = 73mm
W = 130mm W = 210mm W = 152mm
32 way din-rail
Weight 880g 3,200g 920g
10