Safety Relay User Manual Owner's manual

Rockwell Automation Publication 440C-UM001C-EN-P - November 2014 33
Configuring the CR30 Chapter 4
Press the Verification button within five seconds.
Figure 13 - Second Verification Digit
Press the Verification button within five seconds.
Figure 14 - Third Verification Digit
Press the Verification button within five seconds.
Figure 15 - Fourth Verification Digit
After five seconds, the LED will revert to show the status of the inputs and
outputs as configured in the CCW.
Verification Digit 2
Value is 9
Verification Digit 3
Value is 1
Verification Digit 4
Value is 6