Safety Relay User Manual Owner's manual

Rockwell Automation Publication 440C-UM001C-EN-P - November 2014 141
Appendix D
ControlFLASH Firmware Upgrade
Upgrade the Firmware
This appendix shows how to flash update the firmware in a Guardmaster CR30
safety relay using ControlFLASH™. To download the latest Guardmaster CR30
safety relay firmware revision, go to http://www.rockwellautomation.com/
support/pcdc.page and select your desired revision.
1. Through USB connection: Verify successful RSLinx Classic
communications with you Guardmaster CR30 safety relay by USB using
RSWho. The Guardmaster CR30 uses the AB_VBP-x driver.
2. Start ControlFLASH
Click Start > All Programs > FLASH Programming Tools >
ControlFLASH.
3. Select Local and click OK.