Manual

1
Installation Instructions
PHOTOSWITCH
R
Bulletin 42KF
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
Sensors Transmitted Beam Diffuse
1 3m Cable/with 2m Coated 42KF--T1JNTN--A3* 4 2 K F -- D 1 K N T H -- A 3
2 Sensing Distance 3m (119 inch) 30cm (12 inch)
3 Field of View
10_ Receiver
-- --
4 Sensitivity Adjustment With External Accessory Module
5 Transmitting LED Infrared LED (880nm)
6 Indication
Trans:Power (Red LED)
Rcvr:Output(RedLED)
Stable (Green LED)
Output (Red LED)
Stable (Green LED)
7 Supply Voltage 12--24V DC + 10% (Class 2 source required)
8 Max Current Comsumption 12mA: Emitter, 15mA: Rcvr, 10mA: Sense Module 20mA: Sensor, 10mA: Sense Module
9 Output/Type
NPN Standard, PNP**
DO Standard LO Standard
10 Max Load Current 100mA
11 Hysteresis -- -- 10% (Max)
12 Response Time 350s, 650s**
13 Operating Tempurature
-- 2 5 _Cto+55_C(--13_Fto+131_F)
14 Relative Humidity 0% to 100%
15 Coating Material PF A (Fluorine Resin)
16 Environmental Protection IP67, 1200psi (8270kPa) Washdown (up to 1m from sensor)
17 Vibration 10--55 Hz, 1.5mm Amplitude 2hr. 3 Directions, 120 Excursions
18 Shock 30G, meets or exceeds IEC 60947--5--2
19 Electrical Protection Short Circuit and Overload Protection
20 Approvals UL listed, C--UL listed, CE marked for all applicable directives
* 42KT--T1JNTN--A3 is shipped as a receiver/emitter pair (42KT--R1JNTN--A3/42KT--E1JNTN--A3)
** With optional sensitivity adjustment module accessory.
Wiring
Brown
Blue
Black
Brown
Blue
Transmitted Beam Source Sensor without Sensitivity Adjustment Module
(+)
(--)
Orange
RL
(+)
(--)
NC
Sensor with Sensitivity Adjustment Module
Black
Brown
Blue
Orange
RL
(+)
(--)
61--6736
Black
Brown
Blue
Orange
RL
(+)
(--)
61--6737
Black
Brown
Blue
Black
Brown
Blue