User Manual

Operating the Drive Using a LonMark Profile 7-13
Generic Parameter Register Setting, Read
Definition: network input config SNVT_count nciParRdAddress;
Explanation: Selects register in the drive to read. The first digit is the drive
drop number. The remaining digital represent the register. For
example, 203 = drop 2, register 3. See section 8.6 for more
information.
Default: Read from drive
Range: 000-063 = Drop 0
100-163 = Drop 1
200-263 = Drop 2
300-363 = Drop 3
Speed Setpoint Scaling Default Value
Definition: network input config SNVT_lev_percent nciDrvSpeedScale
Explanation: Sets its (?) value to nviDrvSpeedScale on every start up. See
Speed Setpoint Scaling in section 7.1.
Range: -163% to 163%
Default: 0