User Manual

Operating the Drive Using a LonMark Profile 7-5
.
Run/Jog Select
Definition: network input SNVT_switch nviJogSel
Explanation: Selects run mode or jog mode for the drive.
• Jog reference frequency is defined by nciJogRef.
• Start/stop jogging the drive with nviSpeedStpt.state.
• For reverse operation, set (nviSpeedScale *
nviSpeedStpt.value) negative
Range: 0 = Run Mode
1 = Jog Mode
OCL Enable
Definition: network input config SNVT_switch nviOCL_enable
Explanation: Enables the Outer Control Loop (OCL).
Range: 0 = Disabled
1 = Enabled