User Manual

Contents I
CONTENTS
Chapter 1 Introduction
1.1 Related Documentation ................................................................................... 1-1
1.2 Getting Assistance from Rockwell Automation................................................ 1-1
Chapter 2 Getting Started
2.1 Required Equipment........................................................................................ 2-2
2.2 Installation Checklist........................................................................................ 2-3
Chapter 3 Installing the LonWorks Module in the Drive
3.1 Installing the Module in 1 to 5 HP@460 VAC Drives ..................................... 3-3
3.2 Installing the LonWorks Module in 7.5 to 10 HP @ 460 VAC Drives .............. 3-7
3.3 Installing the LonWorks Module in 1 to 20 HP@230 VAC Drives................. 3-11
3.4 Installing the LonWorks Module in 30 to 100HP@230VAC and
75 to 200 @ 460VAC Drives3-15
3.5 Installing the LonWorks Module in 15 to 25 HP and 25 to 60 HP @ 460VAC
Drives3-20
3.6 Installing the LonWorks Module in 200 to 400 HP @ 460 VAC Drives ......... 3-26
Chapter 4 Connecting the Drive to the Network and Applying Power
4.1 Connecting the Drive to the Network............................................................... 4-1
4.2 Terminating the Network ................................................................................. 4-1
4.3 Applying Power................................................................................................ 4-2
Chapter 5 Programming the Drive for Network Communication
5.1 Setting the Control Source (P.000).................................................................. 5-1
5.2 Setting the Network Connection Type (P.061) ................................................ 5-2
5.3 Setting the Communication Loss Response (P.062)....................................... 5-2
5.4 Setting the Speed Display Scale (P.028) ........................................................ 5-5
5.5 Setting the Network Output Register Sources (P.066 to P.069)...................... 5-5
Chapter 6 Installing the Drive as a Node in the Network
Chapter 7 Operating the Drive Using a LonMark Profile
7.1 Input Network Variables (NVIs) ....................................................................... 7-3
7.2 Output Network Variables (NVO) .................................................................... 7-6
7.3 Configuration Properties (NCIs) .................................................................... 7-10
Chapter 8 Conditions Required for Operation
8.1 General Guidelines.......................................................................................... 8-1
8.2 Starting the Drive............................................................................................. 8-1
8.3 Stopping the Drive ........................................................................................... 8-2
8.4 Setting the Frequency ..................................................................................... 8-2
8.5 Writing Values to a VTAC 7 Register .............................................................. 8-2
8.6 Reading Values from VTAC 7 Registers ......................................................... 8-3
8.7 Resetting Faults............................................................................................... 8-3
8.8 Priority of nciMinOutTm and nciSendHrtBt...................................................... 8-3