User Manual

2-2 LonWorks Module for VTAC 7 Drives
2.1 . Required Equipment
Table 2.1 lists the equipment shipped with the LonWorks module. When you unpack
the module, verify that the package includes all of these items.
Table 2.2 lists user-supplied equipment also required to install and configure the
module.
Table 2.1 – Equipment Shipped with the LonWorks Module
Item Description
LonWorks Communications Option module .
LonWorks Communication Option Module User Manual (D2-3498)
Diskette containing .XIF file
Table 2.2 – Required User-Supplied Equipment
Item Description
Phillips screwdriver
Network cable. Recommended cables:
• Belden 85102, unshielded
• Belden 8471, unshielded
• Level IV 22AWG, unshielded
• JY (St) Y 2x2x0.8, shielded
• TIA568A Cat.5 24AWG
For detailed information about recommended cables for a LonWorks network, see
the FTT-10 Free Topology User’s Guide (doc.id.078-0156-01F) at
http://www.echelon.com.
Any standard LonWorks installation tool (for example, LonMaker for Windows).