User Manual Owner's manual

92 Rockwell Automation Publication 290D-UM001A-EN-P - June 2012
Chapter 4 Bulletin 290D/291D/294D Programmable Parameters
NetworkStatus
The parameter provides the status of the
network connections.
Parameter Number 9
Access Rule GET
Data Type WORD
Group Basic Status
Units —
Minimum Value 0
Maximum Value 0xDF
Default Value 0
Bit
Function:
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
——————————————— X ExplicitCnxn
—————————————— X — I/OConnection
————————————— X —— ExplicitCnxnFlt
———————————— X ——— IOCnxnFault
——————————— X ———— IOCnxnIdle
———————— X X X ————— Reserved
——————— X ———————— ZIP1Cnxn
—————— X ————————— ZIP1CnxnFlt
————— X —————————— ZIP2Cnxn
———— X ——————————— ZIP2CnxnFlt
——— X ———————————— ZIP3Cnxn
—— X ————————————— ZIP3CnxnFlt
— X —————————————— ZIP4Cnxn
X ——————————————— ZIP4CnxnFlt
DLXControlStatus
The parameter provides the DeviceLogix
Control Status.
0 = Controlled in Logix programs.
1 = Controlled in local DLX programs.
Parameter Number 10
Access Rule GET
Data Type UINT
Group Basic Status
Units —
Minimum Value 0
Maximum Value OXFF
Default Value 0
Bit
Function:
76543210
——————— X RunForward
—————— X — RunReverse
————— X —— Out00
———— X ——— Out01