User Manual Owner's manual

Rockwell Automation Publication 290D-UM001A-EN-P - June 2012 89
Bulletin 290D/291D/294D Programmable Parameters Chapter 4
PhaseL3Current
This parameter determines the actual
Phase L3 current.
Parameter Number 3
Access Rule GET
Data Type INT
Group Basic Status
Units x.xx Amps
Minimum Value 0
Maximum Value 32767
Default Value 0
AverageCurrent
This parameter determines the average of
3 Phase currents.
Parameter Number 4
Access Rule GET
Data Type INT
Group Basic Status
Units x.xx Amps
Minimum Value 0
Maximum Value 32767
Default Value 0
%ThermalUtilized
This parameter determines the percent of
Thermal Capacity used.
Parameter Number 5
Access Rule GET
Data Type USINT
Group Basic Status
Units Percent
Minimum Value 0
Maximum Value 100
Default Value 0