User Manual Owner's manual

Rockwell Automation Publication 290D-UM001A-EN-P - June 2012 215
CIP Information Appendix B
Instance 154
Instance 154 is the default Output (Consumed) Assembly for Inverter type
(Bulletin 294D) Distributed Starters.
Instance 156
Instance 156 is the Exhaustive Drive Status Assembly Instance
22
Parameter 16 – TripStatus
23
24
Parameter 17 – WarningStstus
25
Instance 152 "Starter Stat" – DeviceLogix Produced Assembly for Bulletin 290D/291D Starters
Instance 154 "Drive Cmd" – DeviceLogix Consumed Assembly for Bulletin 294D Starters
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 JogReverse JogForward ResetFault RunReverse RunFoward
1 Decel2 Accel2 Out05 Out04 Out03 Out02 Out01 Out00
2 CommandFreq (Low) (xxx.x Hz)
3 CommandFreq (High) (xxx.x Hz)
4 Pt07DeviceIn Pt06DeviceIn Pt05DeviceIn Pt04DeviceIn Pt03DeviceIn Pt02DeviceIn Pt01DeviceIn Pt00DeviceIn
5 Pt15DeviceIn Pt14DeviceIn Pt13DeviceIn Pt12DeviceIn Pt11DeviceIn Pt10DeviceIn Pt09DeviceIn Pt08DeviceIn
6 An00DeviceIn (lowbyte)
7 An00DeviceIn (highbyte)
Instance 156 "Drive Status" – Produced Assembly for Bulletin 294E Starters
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 AtReference NetRefStatus NetControlStatus Ready RunningReverse RunningForward WarningPresent TripPresent
1 BrakeStatus DisconnectClosed KeyPadJogging KeyPadHand KeyPadOff KeyPadAuto DLXEnabled
2 Output Frequency (Low) (xxx.x Hz)
3 Output Frequency (High) (xxx.x Hz)
4 Pt05 Pt04 Pt03 Pt02 Pt01 Pt00
5
6 Pt07DeviceOut Pt06DeviceOut Pt05DeviceOut Pt04DeviceOut Pt03DeviceOut Pt02DeviceOut Pt01DeviceOut Pt00DeviceOut
7 Pt15DeviceOut Pt14DeviceOut Pt13DeviceOut Pt12DeviceOut Pt11DeviceOut Pt10DeviceOut Pt09DeviceOut Pt08DeviceOut
8 An00DeviceOut (low byte)
9 An00DeviceOut (high byte)
10
Parameter 3 – OutputCurrent
11
12
Parameter 4 – OutputVoltage
13